Пристрої

Додаткові деталі по UWB-BLE пристроям Leantegra та деяким пристроям від наших партнерів.

Leantegra UT-100

Недорогий та енергоефективний UWB-BLE RTLS тег з IP67 корпусом, акселерометром, барометром, з підтримкою системи машинного навчання TagML.

UT-100 Характеристики

Апаратні Компоненти

  • UWB: Decawave DW1000

  • BLE: Nordic nRF52832 

  • Accelerometer: STM LIS2DW12
  • Barometer: Bosch BMP388 

Функціонал UWB RTLS

  • UWB TDoA: 40-50 cm accuracy, up to 80 meters range, up to 500 tags/sec per zone.
  • UWB TWR: 10-20 cm accuracy, up to 100 meters range, up to 40 tags/sec per zone.
  • 3D RTLS is possible with less anchors – using the barometer.
  • Configurable UWB channels and TX rate via BLE GATT parameters or the mobile application.
  • Can be configured as UWB RTLS anchor with BLE Mesh connectivity.

Функціонал BLE

  • BLE 5.2 support with the standard features, including LE Audio.
  • BLE zoning and ranging – up to 70 meters.
  • iBeacon, Eddystone and TAG mode support.
  • Support for RSSI-IMU RTLS – fusion of BLE RSSI with accelerometer values using Kalman filter. Location accuracy: 3-5 meters.
  • Large set of BLE GATT parameters for configuration from the mobile application or Nordic nRF Connect.
  • BLE Mesh for data relay scenarios. 
  • Low-latency bridge between UWB and BLE – can be used for collision avoidance based on UWB TWR, where latency and feedback are critical.

 Функціонал TagML

  • Leantegra customized TensorFlow Lite framework for nRF52.
  • Support for multiple tools from the TensorFlow ecosystem – for example: Edge Impulse.
  • On-device motion recognition: inactive, walking, running, falling etc.
  • Support for complex motion recognition – for example: construction activities.
  • Real-time sensor classification for barometer and accelerometer data.

Живлення

  • CR2477 battery or CR2477 rechargeable accumulator.
  • Adaptive TX rate for battery saving  – for example: 500 msec for active and 10 seconds for inactive modes.
  • Sleep mode current: 10 uA; UWB active current: 100 mA.
  • Up to 12 months on a single charge for UWB-BLE operations.
  • Up to 24 months on a single charge for BLE only operations.

Розміри

  • Default housing: 61 x  36 x 20 mm.
  • Possible to repackage into flexible wristbands or other form-factors.

Leantegra UA-IX

Недорогий та енергоефективний UWB-BLE RTLS якір з IP67 корпусом. Підтримує TDoA, TWR, RSSI позиціонування та повністю бездротову установку (без кабелів).

UA-IX Характеристики

Апаратні Компоненти

  • Main MCU: STM32H7 (Cortex-M7)

  • UWB: Decawave DW1000

  • BLE: Nordic nRF52810

  • Wi-Fi: Texas Instruments CC3100

  • 100 Mbit Ethernet and 12-24V PoE for power supply

  • USB Type-C for 5V power supply

  • MicroSD card slot for logging and firmware updates

Функціонал UWB RTLS

  • Master and Slave modes for UWB RTLS – configurable via the mobile app or BLE GATT parameters.
  • UWB TDoA: 40-50 cm accuracy, up to 80 meters range, up to 500 tags/sec per zone.
  • UWB TWR: 10-20 cm accuracy, up to 100 meters range, up to 40 tags/sec per zone.
  • 3D RTLS is possible with less anchors – using the barometer on UT-100 tags.

Функціонал BLE 

  • BLE 5.2 support with the standard features.
  • BLE zoning and ranging – up to 70 meters.
  • iBeacon, Eddystone and TAG mode support.
  • Support for RSSI-IMU RTLS – fusion of BLE RSSI with accelerometer values using Kalman filter. Location accuracy: 3-5 meters.
  • Large set of BLE GATT parameters for configuration from the mobile application or Nordic nRF Connect.. 
  • Low-latency bridge between UWB and BLE – can be used for collision avoidance based on UWB TWR, where latency and feedback are critical

Серверні Протоколи

  • Default: MQTT for RTLS data exchange and remote configurations
  • HTTP / HTTPS

Мережі та Живлення

  • 802.11n Wi-Fi for LAN connectivity or Wi-Fi Direct.
  • Wi-Fi connectivity range: up to 40-50 meters.
  • 12-24V PoE and 100 Mbit Ethernet.
  • 5V USB Type-C connector for power supply.
  • Possibility to use USB powerbanks for power supply: 20-24 hours on 10,000 mAh powerbank.
  • Optional: CAN connection to machinery and vehicles for feedback / control scenarios – for example: collision avoidance or vehicle telemetry.

Розміри

  • Default housing: 170 x 120 x 45 mm.

Leantegra LTE-BLE Locator

Тунельний RTLS пристрій для шахтарських ліхтарів “Oldham” з підтримкою протоколів NB-IoT і Cat-M1.

Характеристики: LTE-BLE Locator

Апаратні Компоненти

  • BLE: Nordic nRF52832

  • LTE: Nordic nRF9160

  • USB Type-C for power supply

Функціонал RTLS

  • Reverse BLE RTLS to work inside underground mines or other industrial locations, where tunnels are present.

  • Location accuracy: 10-20 meters for 1D RTLS.
  • Successfully deployed for both miner tracking and vehicle tracking.

Серверні Протоколи

  • Default: MQTT for RTLS data exchange and remote configurations
  • HTTP / HTTPS

Мережі та Живлення

  • LTE NB-IoT and Cat-M1 support, tested in the private LTE network in one underground mine.
  • Power supply: 5V from the mining accumulator or USB.
  • Optional: USB cigarette plug for in-vehicle installation and vehicle tracking.

Розміри

  • PCB size: 81 x 36 x 5 mm.

WiFi-BLE Locator: Leantegra и ІнПромТех

Тунельний RTLS пристрій для шахтарських ліхтарів ІнПромТех з підключенням по Wi-Fi та телеметрією по ModBus RTU.

Характеристики: WiFi-BLE Locator

Апаратні Компоненти

  • BLE: Nordic nRF52832

  • Wi-Fi: Texas Instruments CC3100

  • Accelerometer: STM LIS2DW12

Функціонал RTLS

  • Reverse BLE RTLS to work inside underground mines or other industrial locations, where tunnels are present.

  • Location accuracy: 10-20 meters for 1D RTLS.
  • Successfully deployed for coal mines.

ModBus RTU 

  • Telemetry from methane, CO and temperature sensors.
  • Display SOS-Alarm messages on InPromTech Smart Lamps.

Серверні Протоколи

  • Default: MQTT for RTLS data exchange and remote configurations
  • HTTP / HTTPS

Мережі та Живлення

  • 802.11n for Wi-Fi connectivity.
  • Power supply: 5V from the mining accumulator.

Розміри

  • PCB size: 58 x 36 x 5 mm

Leantegra WiBeat BLE

BLE бікон та локаційний маячок з програмуємою кнопкою, IP66 корпусом, підтримує iBeacon, Eddystone та RTLS режими.

Характеристики: WiBeat BLE

Апаратні Компоненти

  • BLE: Nordic nRF52832

  • Accelerometer: STM LIS2DW12
  • Programmable button and LED

Функціонал BLE

  • BLE 5.2 support with the standard features.
  • BLE zoning and ranging – up to 70 meters.
  • iBeacon, Eddystone and TAG mode support.
  • Support for RSSI-IMU RTLS – fusion of BLE RSSI with accelerometer values using Kalman filter. Location accuracy: 3-5 meters.
  • Large set of BLE GATT parameters for configuration from the mobile application or Nordic nRF Connect.
  • BLE Mesh for data relay scenarios. 

Функціонал TagML

  • Leantegra customized TensorFlow Lite framework for nRF52.
  • Support for multiple tools from the TensorFlow ecosystem – for example: Edge Impulse.
  • On-device motion recognition: inactive, walking, running, falling etc.
  • Support for complex motion recognition – for example: construction activities.
  • Real-time sensor classification for accelerometer data.

Живлення

  • CR2450 battery or CR2450 rechargeable accumulator.
  • Adaptive TX rate for battery saving  – for example: 500 msec for active and 10 seconds for inactive modes.
  • Sleep mode current: 4 uA; BLE active current: 300 uA.
  • Up to 24 months on a single charge for BLE operations.

Розміри

  •  50 x 37 x 14.5 mm

ATEX BLE Бікон: Leantegra та ІнПромТех

ATEX BLE бікон для вугільних шахт з високим вмістом метану та високими вимогами по безпеці.

Характеристики: ATEX BLE Бикон

Апаратні Компоненти

  • BLE: STM BlueNRG

  • Main MCU: STM32L0

Функціонал BLE

  • BLE 4.2 support with the standard features.
  • BLE zoning and ranging – up to 70 meters.
  • iBeacon, Eddystone and TAG mode support.
  • Large set of BLE GATT parameters for configuration from the mobile application or Nordic nRF Connect.
  • BLE Mesh for data relay scenarios.

Живлення

  • CR2477 battery or CR2477 rechargeable accumulator.
  • Average current consumption: 30 uA.
  • Up to 24 months on a single charge for BLE operations.

Розміри

  •  35 x 35 x 20 mm

Leantegra WiBeat UWB

UWB тег з програмуємою кнопкою та IP66 корпусом, підтримує TDoA, TWR RTLS і бездротову зарядку.

WiBeat UWB Характеристики

Апаратні Компоненти

  • UWB: Decawave DWM1000

  • Main MCU: STM32L0
  • Accelerometer: STM LIS2DW12
  • Programmable button and LED

Функціонал UWB

  • UWB TDoA: 40-50 cm accuracy, up to 80 meters range, up to 500 tags/sec per zone.
  • UWB TWR: 10-20 cm accuracy, up to 100 meters range, up to 40 tags/sec per zone.

  • Two-way protocol for LED signaling or programmable button commands.

Живлення

  • Wireless recharging (Qi charger) – using any standard smartphone chargers.
  • Up to 2 weeks for TDoA without recharging.
  • Up to 24 hours for TWR without recharging.

Розміри

  •  50 x 37 x 14.5 mm

Пристрої від Партнерів: "Смарт Ліхтар" від ІнПромТех

Шахтарський ліхтар з широким функціоналом від ІнПромТех.

Містить тунельній RTLS, Wi-Fi модуль, аларм-СОС повідомлення, датчики для метану-СО-температури. Нативно підтримується сервером Leantegra.

IMG_0325
IMG_0326

© 2015—2021 Leantegra Inc. All Rights Reserved. 

Пристрої

Запросити Інформацію

We use cookies to personalize your experience. By using our website you agree to our Privacy Policy